Symbio Laboratories is pleased to announce that environmental depositional dust analysis is now available through our laboratories across Australia as part of our expanding environmental capability.
Dust emissions can be generated from the following sources:
- Vehicle movements on sealed or unsealed roads
- Mines and quarries
- Road works/construction
- Housing developments
- Waste handling facilities
- Numerous industrial operations, including grain drying and storage, timber mills, stonemasons, mineral processing, cement handling and batching and fertiliser storage and processing.
What is Dust Deposition?
Dust deposition is dust that settles out of the ambient air. Dust deposition gauges, located in strategic locations, are normally utilised to collect the samples. They collect the dust settling over a fixed surface area over a period of time. The dust is removed from the gauge, filtered and weighed and the results are reported in terms of the weight of dust collected per unit of surface area over a fixed period of time e.g. g/m2/30 days.
The equipment used for deposition monitoring typically collects dust particles greater than about 10–20 microns. The main attraction of the deposit gauge method is its relatively low cost and simplicity.
Measurement period is typically 1 month and cannot be reduced to anything less than about 15 days without a significant loss in sensitivity.
Depositional Dust Analysis at Symbio
Need dust deposition analysis as part of your environmental testing needs? Call Symbio now to discuss your project with our team.